Ford Bronco 3 Body Lift Kits

Best Body Lift Kits for Ford Bronco 3

The body lift kit raises the body of your Ford Bronco 3 by several inches while keeping the suspension and wheels at the same height. This is accomplished by mounting the struts on the body of your Ford Bronco over the mounting brackets. This type of elevator does not affect the ride or handling in any way. This elevator is less expensive due to the less cumbersome installation and the fact that you won’t have to buy new shocks or adjust the wheels. The Ford Bronco elevator with this elevator is able to retain the factory suspension adjustment and wheel alignment.

Body Lift Kits for ford bronco 3

Body Lift Kits for Ford Bronco 3 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977

body lift kits ford bronco

Features

  • Provides inches of lift without modifying existing suspension components
  • Allows use of larger diameter tires and factory rims for improved ground clearance
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters
  • Maintains the factory smooth ride
  • Keeps the truck’s center of gravity lower than a comparable suspension lift

Body Lift Kits for Ford Bronco 3 1984, 1985, 1986, 1987, 1988

body lift kits ford bronco

Features

  • Provides 3-inches of lift without modifying existing suspension components
  • Allows use of larger diameter tires and factory rims for improved ground clearance
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters
  • Maintains the factory smooth ride
  • Keeps the truck’s center of gravity lower than a comparable suspension lift

Body Lift Kits for Ford Bronco 3 1987, 1988, 1989, 1990, 1991

body kits for ford bronco

Features

  • Provides 3-inches of lift without modifying existing suspension components
  • Allows use of larger diameter tires and factory rims for improved ground clearance
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters
  • Maintains the factory smooth ride
  • Keeps the truck’s center of gravity lower than a comparable suspension lift

Body Lift Kits for Ford Bronco 3 Buying Guide

Benefits of Body Lift Kits for Ford Bronco 3

The difference in height between the rear and front of your Ford Bronco 3 can be as little as one inch and if your Ford Bronco 3 is not aligned, there is often a visual mismatch. Body Lift Kits for Ford Bronco 3 can correct this in no time. Body Kits for Ford Bronco 3 are easy to install and they can align your Ford Bronco 3 on both ends in just a few hours.

The benefits of Body Lift Kits for Ford Bronco 3 can be quite significant

  • You can use larger wheels for your Ford Bronco 3 with enough clearance to prevent friction.
  • Body Lift Kits for Ford Bronco 3 can add extra support for the front equipment, preventing possible sagging.
  • You’ll prevent a common sagging problem in the lower Ford Bronco 3.
  • An equalizer for the Ford Bronco 3 can reduce braking pressure, especially when you need to brake quickly.
  • Your Ford Bronco will become more balanced, reducing excessive wear.

The Most Common Types of Body Lift Kits

All Body Lift kits can have the same effect on your Ford Bronco 3 – raising the front of the Ford Bronco 3 and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Body Lift Kits for Ford Bronco 3 will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

Body Lift Kits for ford bronco 3

How to Install Lift Kit on a Ford Bronco 3?

Before commencing installation of the Body Lift Kits for Ford Bronco 3, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Ford Bronco 3 to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Ford Bronco 3.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Ford Bronco 3. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Body Lift Kits for Ford Bronco 3

  • Pry bars are needed to remove any parts.
  • PB Blaster is a penetrating oil that is better suited to elastic mounts.
  • A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
  • Vehicle jacks and stands rated for your Ford Bronco 3 are needed to reach all Ford Bronco 3 suspension parts.
  • A torque wrench is needed to fit the reinforcements to the correct torque.
  • Lug wrench is needed to save time when removing lugs from the strut.
  • Screwdriver for unscrewing parts and reassembling parts.
  • Hammer to break out old parts.

how to install lift kit

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Ford Bronco 3 and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Ford Bronco 3 from the ground.

Installing Lift Kits for Ford Bronco 3

  1. Disconnect the negative battery terminal.
  2. Loosen the lug nuts.
  3. Position the front of the Ford Bronco 3 at a height high enough for you to climb under the vehicle and install the new components.
  4. Always fit protective stands under each side of the Ford Bronco 3 for support.
  5. Raise the floor jack under the axle to support the weight of the Ford Bronco 3 as the suspension components are removed.
  6. Remove the wheels of the Ford Bronco 3.
  7. Remove the following components: Running shocks, U-bolts, and springs from your Ford Bronco 3.
  8. Take the new U-bolts and fit them into your Ford Bronco 3 where the old ones used to be.
  9. Assemble the shocks using the kit’s instructions.
  10. Ensure that all nuts, bolts, and new components on your Ford Bronco 3 are securely fastened (use a torque wrench).
  11. Remove the safety struts and carefully lower your Ford Bronco 3 while holding it level.
  12. Re-clamp the battery’s negative terminal.
  13. Repeat the steps above for the rear suspension for the Ford Bronco 3.

Body Lift Kits for Ford Bronco 3 FAQ:

You can see our answers to some of the most frequently asked questions about Body Lift Kits for Ford Bronco 3.

Q. How big is the tire I can install with the Body Lift Kits for the Ford Bronco 3?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Ford Bronco 3, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Body Lift Kits for my Ford Bronco 3 myself?
A. Most Body Lift Kits can easily be installed by yourself in your garage. Body Lift Kits for the Ford Bronco 3 include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Body Lift Kits for Ford Bronco 3 used for?
A. Body Lift Kits are needed to make your Ford Bronco 3 look more level. Body Lift Kits can add lift, balance your Ford Bronco 3, and offer other great benefits.

Share to friends
David West

David West has extensive experience in the automotive industry and he shares his expertise with you to make choosing car parts as easy and convenient for you as possible.

Rate author
Hidkitsblog