Ford Raptor Leveling Kits

Best Leveling Kits for Ford Raptor

The leveling kit allows you to level the front of the Ford Raptor so that it is aligned with the rear suspension, resulting in a specific type of truck. The Ford Raptor comes from the factory with a small rake pointing down from the rear of the vehicle to the front. The even suspension aligns the rails and makes the front end of the Ford Raptor level with the rear end.

Leveling Kits for ford raptor

Leveling Kits for Ford Raptor 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

leveling kits for ford raptor

Features

  • Give your Ford Raptor the Perfect Blend of Performance, Protection, and Style from Rough Country.
  • Unmatched Ground Clearance to Conquer On and Off-Road Obstacles.
  • Maintains Smooth, OEM Like Ride | Levels the Front with the Rear
  • Easy at Home Installation, Supported by RC.
  • Backed by Rough Country’s Lifetime Replacement Warranty

Leveling Kits for Ford Raptor 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

leveling kits for ford raptor

Features

  • COMPATIBLE WITH 2010 – 2017 Ford F-150 Raptor (2WD 4WD)
  • CONTENTS: (2x) Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment and eliminates vibrations in the driveline.

Leveling Kits for Ford Raptor 2017, 2018, 2019, 2020, 2021

leveling kits for ford raptor

Features

  • 2017 Ford Raptor 2.5″ SST Lift Kit
  • CNC machined 6061 T6 billet aluminum construction
  • Top hat coil-over extensions with machined billet spring pre-load spacers
  • Includes 4-inch tall rear lift blocks
  • Includes control arm bump stops

leveling kits for ford raptor

Features

  • 2017 Ford Raptor 2.5″ Leveling Kit
  • CNC machined 6061 T6 billet aluminum construction
  • Top hat coil-over extensions with machined billet spring pre-load spacers
  • Includes control arm bump stops

Leveling Kits for Ford Raptor Buying Guide

Benefits of Leveling Kits for Ford Raptor

The difference in height between the rear and front of your Ford Raptor can be as little as one inch and if your Ford Raptor is not aligned, there is often a visual mismatch. Leveling Kits for Ford Raptor can correct this in no time. Leveling Kits for Ford Raptor is easy to install and they can align your Ford Raptor on both ends in just a few hours.

The benefits of Leveling Kits for Ford Raptor can be quite significant

  • You can use larger wheels for your Ford Raptor with enough clearance to prevent friction.
  • Leveling Kits for Ford Raptor can add extra support for the front equipment, preventing possible sagging.
  • You’ll prevent a common sagging problem in the lower Ford Raptor.
  • An equalizer for the Ford Raptor can reduce braking pressure, especially when you need to brake quickly.
  • Your Ford Raptor will become more balanced, reducing excessive wear.

The Most Common Types of Leveling Kits

All leveling kits can have the same effect on your Ford Raptor – raising the front of the Ford Raptor and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Leveling Kits for Ford Raptor will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

Leveling Kits for ford raptor

How to Install Lift Kit on a Ford Raptor?

Before commencing installation of the Body Lift Kits for Ford Raptor, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Ford Raptor to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Ford Raptor.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Ford Raptor. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Body Lift Kits for Ford Raptor

  • Pry bars are needed to remove any parts.
  • PB Blaster is a penetrating oil that is better suited to elastic mounts.
  • A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
  • Vehicle jacks and stands rated for your Ford Raptor are needed to reach all Ford Raptor suspension parts.
  • A torque wrench is needed to fit the reinforcements to the correct torque.
  • A lug wrench is needed to save time when removing lugs from the strut.
  • Screwdriver for unscrewing parts and reassembling parts.
  • Hammer to break out old parts.

how to install leveling kit

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Ford Raptor and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Ford Raptor from the ground.

Installing Lift Kits for Ford Raptor

  1. Disconnect the negative battery terminal.
  2. Loosen the lug nuts.
  3. Position the front of the Ford Raptor at a height high enough for you to climb under the vehicle and install the new components.
  4. Always fit protective stands under each side of the Ford Raptor for support.
  5. Raise the floor jack under the axle to support the weight of the Ford Raptor as the suspension components are removed.
  6. Remove the wheels of the Ford Raptor.
  7. Remove the following components: Running shocks, U-bolts, and springs from your Ford Raptor.
  8. Take the new U-bolts and fit them into your Ford Raptor where the old ones used to be.
  9. Assemble the shocks using the kit’s instructions.
  10. Ensure that all nuts, bolts, and new components on your Ford Raptor are securely fastened (use a torque wrench).
  11. Remove the safety struts and carefully lower your Ford Raptor while holding it level.
  12. Re-clamp the battery’s negative terminal.
  13. Repeat the steps above for the rear suspension for the Ford Raptor.

Leveling Kits for Ford Raptor FAQ:

You can see our answers to some of the most frequently asked questions about Leveling Kits for Ford Raptor.

Q. How big is the tire I can install with the Leveling Kits for the Ford Raptor?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Ford Raptor, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Leveling Kits for my Ford Raptor myself?
A. Most Leveling Kits can easily be installed by yourself in your garage. Leveling Kits for the Ford Raptor include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Leveling Kits for Ford Raptor used for?
A. Leveling Kits are needed to make your Ford Raptor look more level. Leveling Kits can add lift, balance your Ford Raptor and offer other great benefits.

Share to friends

David West has extensive experience in the automotive industry and he shares his expertise with you to make choosing car parts as easy and convenient for you as possible.

Rate author
Hidkitsblog