Nissan Armada Leveling Kits

Best Leveling Kits for Nissan Armada

The leveling kit allows you to level the front of the Nissan Armada so that it is aligned with the rear suspension, resulting in a specific type of truck. The Nissan Armada comes from the factory with a small rake pointing down from the rear of the vehicle to the front. The even suspension aligns the rails and makes the front end of the Nissan Armada level with the rear end.

Leveling Kits for nissan armada

Leveling Kits for Nissan Armada 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

leveling kits nissan armada

Features

  • COMPATIBLE WITH 2004 – 2015 Nissan Armada 2WD / 4WD
  • CONTENTS: (2x) High-Density Polyurethane Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: No Special Tools Required! Installs in just 1-2 hours without disassembling your strut assembly. An alignment is recommended after install.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.

Leveling Kits for Nissan Armada 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

leveling kits nissan armada

Features

  • COMPATIBLE WITH 2004 – 2015 Nissan Armada. Fits 2WD and 4WD models.
  • CONTENTS: (2x) Aircraft Billet Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2.5-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.

Leveling Kits for Nissan Armada Buying Guide

Benefits of Leveling Kits for Nissan Armada

The difference in height between the rear and front of your Nissan Armada can be as little as one inch and if your Nissan Armada is not aligned, there is often a visual mismatch. Leveling Kits for Nissan Armada can correct this in no time. Leveling Kits for Nissan Armada are easy to install and they can align your Nissan Armada on both ends in just a few hours.

The benefits of Leveling Kits for Nissan Armada can be quite significant

  • You can use larger wheels for your Nissan Armada with enough clearance to prevent friction.
  • Leveling Kits for Nissan Armada can add extra support for the front equipment, preventing possible sagging.
  • You’ll prevent a common sagging problem in the lower Nissan Armada.
  • An equalizer for the Nissan Armada can reduce braking pressure, especially when you need to brake quickly.
  • Your Nissan Armada will become more balanced, reducing excessive wear.

The Most Common Types of Leveling Kits

All leveling kits can have the same effect on your Nissan Armada – raising the front of the Nissan Armada and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Leveling Kits for Nissan Armada will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

Leveling Kits for nissan armada

How to Install Lift Kit on a Nissan Armada?

Before commencing installation of the Body Lift Kits for Nissan Armada, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Nissan Armada to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Nissan Armada.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Nissan Armada. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Body Lift Kits for Nissan Armada

  • Pry bars are needed to remove any parts.
  • PB Blaster is a penetrating oil that is better suited to elastic mounts.
  • A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
  • Vehicle jacks and stands rated for your Nissan Armada are needed to reach all Nissan Armada suspension parts.
  • A torque wrench is needed to fit the reinforcements to the correct torque.
  • A lug wrench is needed to save time when removing lugs from the strut.
  • Screwdriver for unscrewing parts and reassembling parts.
  • Hammer to break out old parts.

how to install leveling kit

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Nissan Armada and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Nissan Armada from the ground.

Installing Lift Kits for Nissan Armada

  1. Disconnect the negative battery terminal.
  2. Loosen the lug nuts.
  3. Position the front of the Nissan Armada at a height high enough for you to climb under the vehicle and install the new components.
  4. Always fit protective stands under each side of the Nissan Armada for support.
  5. Raise the floor jack under the axle to support the weight of the Nissan Armada as the suspension components are removed.
  6. Remove the wheels of the Nissan Armada.
  7. Remove the following components: Running shocks, U-bolts, and springs from your Nissan Armada.
  8. Take the new U-bolts and fit them into your Nissan Armada where the old ones used to be.
  9. Assemble the shocks using the kit’s instructions.
  10. Ensure that all nuts, bolts, and new components on your Nissan Armada are securely fastened (use a torque wrench).
  11. Remove the safety struts and carefully lower your Nissan Armada while holding it level.
  12. Re-clamp the battery’s negative terminal.
  13. Repeat the steps above for the rear suspension for the Nissan Armada.

Leveling Kits for Nissan Armada FAQ:

You can see our answers to some of the most frequently asked questions about Leveling Kits for Nissan Armada.

Q. How big is the tire I can install with the Leveling Kits for the Nissan Armada?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Nissan Armada, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Leveling Kits for my Nissan Armada myself?
A. Most Leveling Kits can easily be installed by yourself in your garage. Leveling Kits for the Nissan Armada include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Leveling Kits for Nissan Armada used for?
A. Leveling Kits are needed to make your Nissan Armada look more level. Leveling Kits can add lift, balance your Nissan Armada and offer other great benefits.

Share to friends
David West

David West has extensive experience in the automotive industry and he shares his expertise with you to make choosing car parts as easy and convenient for you as possible.

Rate author
Hidkitsblog