Suzuki Equator Lift Kits

Best Lift Kits for Suzuki Equator

Suspension Lift Kit for the Suzuki Equator vehicle. The Suspension Lift Kit increases the ground clearance of your Suzuki Equator by replacing the front and rear suspension components and shock absorbers. The Suspension Lift Kit for the Suzuki Equator increases the height between the frame and the ground. This allows for much more ground clearance. Articulation in general is improved with a good suspension kit for the Suzuki Equator. Even if you don’t need to crawl on four wheels or rocks, the look of your Suzuki Equator will be much more appealing.

Lift Kits for suzuki equator

Suspension Lift Kit for the Suzuki Equator 2009, 2010, 2011, 2012

suspension kits for Suzuki Equator

Features

  • COMPATIBLE WITH 2009 – 2012 Suzuki Equator (2WD 4WD). *Does NOT Fit Pro4X Model.
  • CONTENTS: (2x) T9 Aircraft Billet Aluminum Front Strut Spacers, (2x) High-Strength Steel Add-a-Leaf Spring Pack, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 3-inch front and 1.5-2 inch rear suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio and the rear lift amount is influenced by your truck’s spring pack condition. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: After an easy 1-2 hour installation process*, you’re ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our Add-A-Leafs can be added to your existing leaf spring packs to increase the load and towing capacity, minimize squat and allow for larger custom rims and tires.

suspension kits for Suzuki Equator

Features

  • COMPATIBLE WITH 2009 – 2012 Suzuki Equator (2WD 4WD). *Does not fit Pro4X Models. / *Rear Kit will work ONLY for Models with Spring Over Axle Setup.
  • CONTENTS: (2x) Front Lift Strut Spacers, (2x) Rear Lift Tapered Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: 2.5 Inch Front + 2 Inch Rear Suspension Lift. This Kit Includes 4x U-Bolts: 9/16″ Threads, 10″ Long x 2.5″ Wide. Requires enlarging retainer plate holes in order to replace factory 1/2″ U-Bolts with our extended 9/16″ U-Bolts.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. Please note that front strut spacer thickness to lift height is not a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. An alignment is always recommended if you are altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Build-In Taper Corrects Pinion Angle to Reach Stock Ride Quality.

suspension kits for Suzuki Equator

Features

  • COMPATIBLE WITH 2009 – 2012 Suzuki Equator (2WD 4WD). *Does NOT Fit Pro4X Model.
  • CONTENTS: (2x) High-Strength Steel Front Strut Spacers, (2x) High-Strength Steel Add-a-Leaf Spring Pack, (2x) Polyurethane UCA Bump Stops, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 3 Inch Front + 1.5-2 Inch Rear Suspension Lift. | *Please note that spacer thickness to lift height is NOT a 1:1 ratio and the rear lift amount is influenced by your truck’s spring pack condition. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: After an easy 2-4 hour installation process, you’re ready to feature your new and improved ride! | *We recommend the use of a Leaf Spring Unloading/Compressing Tool to ensure a safe disassembly of your leaf pack and eliminate the need for additional heavy-duty c-clamps in order to relieve pressure on the springs. | **An alignment is always recommended if you are altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our Add-A-Leafs can be added to your existing leaf spring packs to increase the load and towing capacity, minimize squat and allow for larger custom rims and tires. Two High-Density Polyurethane Bump Stops are included to help prevent hard impacts and damage to the control arms and strut bucket due to metal-to-metal contact.

Suspension Lift Kits for Suzuki Equator Buying Guide

Benefits of Suspension Lift Kits for Suzuki Equator

The difference in height between the rear and front of your Suzuki Equator can be as little as one inch and if your Suzuki Equator is not aligned, there is often a visual mismatch. Suspension Lift Kits for Suzuki Equator can correct this in no time. Suspension Lift Kits for Suzuki Equator are easy to install and they can align your Suzuki Equator on both ends in just a few hours.

The benefits of Suspension Lift Kits for Suzuki Equator can be quite significant

  • You can use larger wheels for your Suzuki Equator with enough clearance to prevent friction.
  • Suspension Lift Kits for Suzuki Equator can add extra support for the front equipment, preventing possible sagging.
  • You’ll prevent a common sagging problem in the lower Suzuki Equator.
  • An equalizer for the Suzuki Equator can reduce braking pressure, especially when you need to brake quickly.
  • Your Suzuki Equator will become more balanced, reducing excessive wear.

The Most Common Types of Suspension Lift Kits

All V kits can have the same effect on your Suzuki Equator – raising the front of the Equator Equator and leveling its height. None of the Suspension Lift kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Suspension Lift Kits for Suzuki Equator will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

Lift Kits for suzuki equator

How to Install Lift Kit on a Suzuki Equator?

Before commencing installation of the Suspension Lift Kits for Suzuki Equator, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Suzuki Equator to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Suzuki Equator.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Suzuki Equator. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Suspension Lift Kits for Suzuki Equator

  • Pry bars are needed to remove any parts.
  • PB Blaster is a penetrating oil that is better suited to elastic mounts.
  • A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
  • Vehicle jacks and stands rated for your Suzuki Equator are needed to reach all Suzuki Equator suspension parts.
  • A torque wrench is needed to fit the reinforcements to the correct torque.
  • A lug wrench is needed to save time when removing lugs from the strut.
  • Screwdriver for unscrewing parts and reassembling parts.
  • Hammer to break out old parts.

how to install lift kit

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Suzuki Equator and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Suzuki Equator from the ground.

Installing Lift Kits for Suzuki Equator

  1. Disconnect the negative battery terminal.
  2. Loosen the lug nuts.
  3. Position the front of the Suzuki Equator at a height high enough for you to climb under the vehicle and install the new components.
  4. Always fit protective stands under each side of the Suzuki Equator for support.
  5. Raise the floor jack under the axle to support the weight of the Suzuki Equator as the suspension components are removed.
  6. Remove the wheels of the Suzuki Equator.
  7. Remove the following components: Running shocks, U-bolts, and springs from your Suzuki Equator.
  8. Take the new U-bolts and fit them to your Suzuki Equator where the old ones used to be.
  9. Assemble the shocks using the kit’s instructions.
  10. Ensure that all nuts, bolts, and new components on your Suzuki Equator are securely fastened (use a torque wrench).
  11. Remove the safety struts and carefully lower your Suzuki Equator while holding it level.
  12. Re-clamp the battery’s negative terminal.
  13. Repeat the steps above for the rear suspension for the Suzuki Equator.

Suspension Lift Kits for Suzuki Equator FAQ:

You can see our answers to some of the most frequently asked questions about Suspension Lift Kits for Suzuki Equator.

Q. How big is the tire I can install with the Suspension Lift Kits for the Suzuki Equator?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Suzuki Equator, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Suspension Lift Kits for my Suzuki Equator myself?
A. Most Suspension Lift Kits can easily be installed by yourself in your garage. Suspension Lift Kits for the Suzuki Equator include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Suspension Lift Kits for Suzuki Equator used for?
A. Suspension Lift Kits are needed to make your Suzuki Equator look more level. Suspension Lift Kits can add lift, balance your Suzuki Equator and offer other great benefits.

Share to friends

David West has extensive experience in the automotive industry and he shares his expertise with you to make choosing car parts as easy and convenient for you as possible.

Rate author
Hidkitsblog